1. When maintaining the jacquard loom, you must press the left and right red stop buttons to indicate that the loom is under maintenance.
2. Don't go over the fence. Please pay attention to the stairs slowly, and be careful not to slip.
3. Remove the cross bar of the wharf, and it is strictly forbidden to hang it on the ground of the gantry crane at will and fall, which will hurt the equipment and the car blocking workers.
4. Do not place tools at will during operation to avoid accidents caused by falling off your hands.
5. When the safety barrier needs to be moved due to maintenance, it must be restored in time after maintenance.
6. After maintenance, when starting the machine, you should first slow down for more than 2 latitudes, and then drive fast after confirming that it is normal. After confirming that the cloth quality is normal, you can leave the maintenance machine only after the equipment operates abnormally.
