Water jet loom is a kind of high-speed loom widely used in recent years, but its products are also limited. Many products cannot be produced, but for general interior fabrics, the production efficiency is very high. The water jet loom needs to be installed and debugged after the new machine is in place, and this process can only be operated with definite experience. The parameters in the loom instructions are for reference only. The main reason is that the accuracy of all parts of the loom is affected, resulting in the imperfect coordination of the operation of all parts. However, the loom should first be preliminarily adjusted according to the stated parameters, and then adjusted according to experience.
Water jet looms belong to jet looms, which use water as the weft insertion medium to produce friction traction force on the weft yarn through the jet water flow, so that the weft yarn on the fixed bobbin is introduced into the shed. Due to the good concentration of water flow, there is no water-proof flow diffusion device on the water jet loom, and even then its reed width can reach more than two meters.
Water jet looms have good water flow convergence, and the friction and traction of water on weft is also large, so the weft flying speed and loom speed of water jet looms rank first among all kinds of looms. It is more suitable for weaving hydrophobic fiber yarn such as synthetic fiber and glass fiber, so there are limitations in variety. General devices include: jet pump, water drop sealing, dredging and recovery device, fabric dehydration and drying device, etc
