High Efficiency Rope-type Washing Machine

 

Flow chart：

Loading→

J box stacked→squeezer padder→

high efficiency rope washingx3(cold)→

high efficiency rope washingx4(hot)→

high efficiency rope washingx2(cold)→

→unloading

Technical data：

Gearing side：	Right or left(face the machine, opposite the gate)
Machine speed：	80m/min
Loading and unloading way：	Flat loading with rope unloading
Total Power：	80KW
Control：	frequency inverters
Steam pressure：	0.4Mpa
Air pressure：	0.4Mpa
Water pressure：	0.1Mpa

Working width:	2000mm
Machine dimension:	45445x4400x7010mm

 

The main structure and characteristics of the machine：

 1：Fabric feed device：

Loading Columns and beams are made of 4mm carbon steel plates. With loading roller and other components.

 

2： J-type stacking box：

The flat fabric is dropped into the box by the active octagonal roll, so that the fabric is fully wetted, and the flat loose fabric is gathered by a small rolling guide cloth loop.

 

3：Squeezer padder：

The frame is made of 3mm304 stainless steel plate folded edge; the main and passive rollers are rubber rollers, diameter Ø230mm, roller surface length 500mm, cylinder pressurization, cloth guide ring and cloth running wheel before rolling point, There is a hexagonal roll after the cloth, hexagonal roll diameter Ø250mm; special adjustment stroke cylinder pressure, rolling gap 0-30mm adjustable, can prevent fabrics from rolling.

 

4：Chamber of Rope-type washing machine：

 1)：Wall board are made of stainless steel plate by CNC punching and folding.

 2)：Capacity is 100~200m.

 3)：Immersed in spiral rope washed

 4)：The box is divided into six grid five-point structure.

5)：All the rollers in the box are active roller, which can effectively prevent the slip of the cloth. Active up roller diameter Ø206mm, active          under roller diameter Ø200mm. The upper and lower active roller are rubber roller; the under active roller support bearing all heavy-          duty bearing..

6)：Hexagonal roller diameter Ø350mm,

        guide roller diameter Ø125mm..

 7)：The main, passive rubber roller, guide roller and hexagonal roller shaft ends are made of leather-type mechanical seal, effectively                 prevent the water spilled out, greatly increasing the bearing and cylinder life.

 8)：Special adjustment stroke cylinder pressure, rolling point gap 0-25mm adjustable, to prevent the fabric rolling injury.

 

5：Unloading roller padder ：

 

The main roller is made of 3mm304 stainless steel plate; The main roller is a rubber roller, the diameter Ø230mm, the roller surface length of 500mm, using cylinder pressure,effectively prevent the sewage out; And the cloth wheel in front,the hexagonal roll in the rear, hexagonal roller diameter Ø250mm.

 

6：Squeezer

The frame is made of 3mm304 stainless steel plate folded edge; the main and passive rollers are rubber rollers, diameter Ø230mm, roller surface length 500mm, cylinder pressurization, cloth guide ring and cloth running wheel before rolling point, There is a hexagonal roll after the cloth, hexagonal roll diameter Ø250mm; special adjustment stroke cylinder pressure, rolling gap 0-30mm adjustable, can prevent fabrics from rolling.